Stain Remover Poultice


Confiad® Stain Remover Poultice is ready - to - use nonacidic cleaning compounds that safely restore stones to its original appearance. Designed for removal of moderate to severe atmospheric staining and other food, alkali, epoxy staining.
Confiad® Stain Remover Poultice is appropriate for use on exterior or interior stone surface.

 

Technical Data Sheets

 

 Characteristics & Properties

 

▶ Removes of food, alkali, epoxy stains.
▶ Easy to use.
▶ Effectively removes deep set oil, dirt.
▶ Non-acidic formula.

 

 

 Storage

 

1. Apply poultice to the surface using a spatula. Uniformly
    apply a thick 5~10mm coating.

2. Using a light polyethylene film or other moisture
    resistant material, cover the area treated with poultice. 
    Tape or otherwise seal off the edges of the ply film.
3. Allow paste to remain on the surface for 12 to 48 hours.
    Remove protective film and dry the paste.
4. Scrape off poultice, Wash the surface thoroughly with
    fresh water using a sponge, soft cloth.
5. Repeat application where necessary.
6. Polish the clean surface with a soft dry cloth.

 

 

Field of Use

 

▶Storage temperature : between 5℃and 30℃

  Must be applied to material at temperature between

  5℃and 30℃

 

 

Packing

 

▶ 2kg, 5kg - bucket



    Cleaners

 

Stone Cleaner

Neutral Cleaner

Powerful Acid Cleaner

Rust Remover(Acid)

         

 

 

Rust Remover(Gel)

Efflorescence Remover

Grease Remover

Wax Stripper

         
 
   
 

Poultice Powder

Stain Remover Poultice