How to use

Polyester Adhesive How to Use (Summary)

Confiad | 2019.10.18 16:58 | Inquiry 2235

1. Directions

   1) Read MSDS and the directions of dispenser.

   2) The surface to be treated must be clean and completely dry.

   3) Take necessary amounts of glue from the tin can.

   4) Add 2 ~ 4g of hardener paste to 100g of component A, depending on the hardening time.

   5) Mix both components thoroughly and apply the adhesive.

   6) After 30 ~ 60 minutes, other processing (grinding, polishing) can be done on the treated parts.
       The hardening process can be fast by heat and delayed by cold.
   
※ Note
   - Sensitive surfaces such as wood, parquet, etc. must be protected against splashes.
   - Some type of stone difficult to polish.
   - Always try the product in an inconspicuous area prior to use.
   - Deep scratches cannot be removed.

※ Special Hints
   - The amounts of hardener higher than 4% can reduce adhesion strength and cause a yellowness
     in the hardened product.
   - The amounts of hardener less than 1% and low temperatures (below 5℃ / 41℉) considerably delay
     hardening time.
   - The bonding layer may shrink (5~8%) caused by the hardening reaction process.
   - After hardening, the adhesive should not be removed by solvents.
     Removal is only possible mechanically.
    


twitter facebook me2day Yozm
4(1/1Page)
How to use
Number Title Writer Inquiry Date
4 Polyester Adhesive Manual for Grouting Application Confiad 1477 2020.06.11 13:32
3 Polyester Adhesive Storage and Handling Confiad 2246 2019.10.22 17:06
>> Polyester Adhesive How to Use (Summary) Confiad 2236 2019.10.18 16:58
1 Polyester Adhesive Safety Information Confiad 2199 2019.10.18 16:53