Stain Remover Poultice


ConfiAd® Stain Remover Poultice is ready to use non-acidic cleaner that safely removes the severe atmospheric stains and other foods, alkali, epoxy stains. 
The product is appropriate for both exterior and interior stone surface.

Stain Remover Poultice

 

Technical Data Sheets

 
 

Video

 



   0.05~0.40 m²/kg (0.24~1.95 ft2/lb)



   2kg (4.4lb) Bucket


Features & Advantages

 


▶ Remove food, alkali, and epoxy stains
▶ Effective for deep oil and dirt

▶ Non-acidic formula

▶ Easy to use

 

Field of Use

 


▶ Marble, limestone, granite, and other natural stones

 

How to Use

 


1. Apply the product uniformly to the surface with 5~10mm thick,

    using a spatula.

2. Using a light polyethylene film or other moisture resistant material,

    cover the treated area.

    Tape or seal off the edges of the film and make several small holes

    on the film.

3. Allow the product to remain on the surface for 12~48 hours.

    After that, remove the film and fully dry the paste.

4. Scrape off the dried product and wash the surface thoroughly

    with fresh water using a sponge or a soft cloth.

5. Repeat the application if necessary.

    ※ Before applying to the entire surface, test on a small area.

 

Storage

 


▶ Storage temperature : 5~30℃ (41~86)
▶ Application temperature : 5~30℃ (41~86)

 




    Cleaners
 

Ultra Power Cleaner

Stone Cleaner

Neutral Cleaner

Neutral Cleaner
(Low Foam)

 

Rust Remover(Acid)-Premium

Rust Remover(Neutral)

Rust Remover(Gel)

Powerful Acid Cleaner

Strong Alkaline Cleaner

Grout Cleaner

Glass Cleaner

Mould & Moss Remover

 
Limescale Remover

Penetration Remover

Abrasive Cleaner

Grease Remover

 
 
Wax Stripper

Graffiti Remover

Adhesive Residue Remover

Sealant Stain Remover

 
 

Epoxy Remover

Oil Poultice

Organic Stain Remover

Stain  Remover Poultice

 
   

Poultice Powder