How to use
Storage and Handling
1. Storage & Handling
1) Store ConfiAd Adhesive in a cool place away from direct sunlight
- High temperature will reduce the shelf life of component A and B.
- Exposure of Component B above 38℃ (100℉) rapidly diminishes the product's reactivity
and thus it must be avoided.
- Refrigeration is acceptable for extending shelf life.
However, freezing should be prevented.
- The recommended measure for longer shelf life is maintaining storage temperature
between 10~21℃ (50~70℉) constantly.
2) Store ConfiAd Adhesive as follows:
- Long period storage: Horizontal direction.
- Short period storage: Up right direction for 2 hours are suitable.
3) To extend shelf life longer, the adhesives can be stored in an air conditioned room
or a fridge specially designed for the storage of flammable products.
- An air bubble can be trapped in Component A or B.
The gas can also be formed in Component B if it is subjected to high temperature during storage or
transport.
- In the event that gas or air bubbles were trapped in the cartridge, upright storage will allow them to
reach to the top (outlet) of cartridge to be eliminated during the initial purge.
(Be sure to purge gas and bubble in the cartridge by pointing up)
4) Component B exposed to high temperature during transport or storage will be broken down and
lose strength. This will generally show up as a slow, uneven or incomplete cure.
- Component B stored correctly will last for 2 years or more but will gradually lose reactivity.
- The decomposition of Component B in high temperature can also release gas out of Component B.
5) Bubbles may appear in the dispensed product and the compressibility of the gas may act like a spring
compressing in each pull of the trigger producing fluctuations in the dispensing rate, off ratio
(uneven cure) and drooling from the tip.
6) Transportation
- The adhesives have to be loaded "Under-deck" in ship for any cases to avoid high temperature.
- Avoid long term inland transportation especially in hot area and in summer season.
- Direct Sunlight must be avoided during transportation.
7) Handling
- Before use or handling, consult the appropriate Material Safety Data Sheet(MSDS).
- Avoid contact with eyes, skin and clothing.
- Wash with soap and water after skin contact.
- Harmful if swallowed. Keep out of the reach of the children
- In case of eye contact flush with water for 15 minutes and get medical attention.
- Keep away from any sources of ignition.
- Avoid breathing vapor and use only with adequate ventilation.
- Wash hands thoroughly after handling.
- Store the adhesive in a cool place away from direct sunlight.
Number | Title | Writer | Inquiry | Date |
---|---|---|---|---|
5 | [Adhesives] ConfiAd Bulk Type | Confiad | 7834 | 2013.11.03 21:05 |
4 | [Adhesives] How to use Cartridge Type (50ml / 75ml / 250ml / 490ml) | Confiad | 7876 | 2013.11.03 21:00 |
3 | [Adhesives] How to use Tube Type (63ml) | Confiad | 7959 | 2013.11.03 20:58 |
>> | [Adhesives] Storage and Handling | Confiad | 7704 | 2013.11.03 20:56 |
1 | [Adhesives] Safety Information | Confiad | 7809 | 2013.11.01 18:44 |